User Tools

Site Tools


2016:huzzah_esp8266

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
2016:huzzah_esp8266 [2016/02/20 09:01] 75.177.137.22016:huzzah_esp8266 [2016/02/20 09:05] (current) 75.177.137.2
Line 23: Line 23:
   * 2 x UART pins   * 2 x UART pins
   * 2 x 3-12V power inputs, reset, enable, LDO-disable, 3.3V output   * 2 x 3-12V power inputs, reset, enable, LDO-disable, 3.3V output
-  * One breakout at the end has an "FTDI" pinout so you can plug in an FTDI or console cable to upload software and read/write debugging information via the UART. When you're done with your coding, remove the cable, and this little module can be embedded into your project box.+  
 +One breakout at the end has an "FTDI" pinout so you can plug in an FTDI or console cable to upload software and read/write debugging information via the UART. When you're done with your coding, remove the cable, and this little module can be embedded into your project box.\\
  
 Each module comes pre-loaded with NodeMCU's Lua interpreter (NodeMCU 0.9.5 build 20150318 / Lua 5.1.4 to be specific), you can run commands, and 'save' Lua programs directly to the module's Flash using a USB-Serial converter cable. But, if you'd like, you can skip Lua and go direct to using the Arduino IDE. Once you download the ESP8266 core, you can treat it just like a microcontroller+WiFi board, no other processors needed.\\ Each module comes pre-loaded with NodeMCU's Lua interpreter (NodeMCU 0.9.5 build 20150318 / Lua 5.1.4 to be specific), you can run commands, and 'save' Lua programs directly to the module's Flash using a USB-Serial converter cable. But, if you'd like, you can skip Lua and go direct to using the Arduino IDE. Once you download the ESP8266 core, you can treat it just like a microcontroller+WiFi board, no other processors needed.\\
2016/huzzah_esp8266.1455976870.txt.gz · Last modified: 2016/02/20 09:01 by 75.177.137.2