Differences

This shows you the differences between two versions of the page.

--- ili9341_to_esp32_wiring [2023/11/23 08:50] – 192.168.1.71
+++ ili9341_to_esp32_wiring [2023/11/24 07:02] (current) – 192.168.1.71
@@ Line 1: / Line 1: @@
-The SPI pins, MOSI, MISO, and SCK, are shared between the display and the touchscreen (and SD card reader). TOUCH_IRQ is optional. If you don't wire it, make sure you comment out touchscreen.interrupt_pin. The SD card pins are not connected.\\
+===== ili9341 LCD to ESP32 wiring =====
+Writeup and wiring from Kevin Dorff, library author and github repository:\\
+URL:  https://github.com/kdorff\\
+The SPI pins, MOSI, MISO, and SCK, are shared between the display and the touchscreen (and SD card reader). TOUCH_IRQ is optional. If you don't wire it, make sure you comment out touchscreen.interrupt_pin.\\
+The SD card pins are not connected.\\
 These may not be optimum wiring, but I've tested them.\\
+This is the ILI9341 connector pinout:\\
+^Pin ^ Function ^
+|1 |Vcc |
+|2 |Gnd |
+|3 |CS |
+|4 |Reset |
+|5 |Dc |
+|6 |MOSI (LCD) |
+|7 |SCK (LCD) |
+|8 |LED |
+|9 |MISO (LCD) |
+|10 |T_Clk |
+|11 |T_CS |
+|12 |T_DIN |
+|13 |T_DO |
+|14 |T_IRQ |
 LCD to ESP32 (30 pin or d1 mini) wiring:\\
@@ Line 17: / Line 42: @@
 | VCC | 3V3|
 | GND | GND|
+{{::2023-11-23_091223.jpg|}}\\
+{{::2023-11-23_092415.jpg|}}\\