ili9341_to_esp32_wiring
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| ili9341_to_esp32_wiring [2023/11/23 09:25] – 192.168.1.71 | ili9341_to_esp32_wiring [2023/11/24 07:02] (current) – 192.168.1.71 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ===== ili9341 LCD to ESP32 wiring ===== | ===== ili9341 LCD to ESP32 wiring ===== | ||
| + | Writeup and wiring from Kevin Dorff, library author and github repository: | ||
| + | URL: https:// | ||
| The SPI pins, MOSI, MISO, and SCK, are shared between the display and the touchscreen (and SD card reader). TOUCH_IRQ is optional. If you don't wire it, make sure you comment out touchscreen.interrupt_pin.\\ | The SPI pins, MOSI, MISO, and SCK, are shared between the display and the touchscreen (and SD card reader). TOUCH_IRQ is optional. If you don't wire it, make sure you comment out touchscreen.interrupt_pin.\\ | ||
| Line 6: | Line 8: | ||
| These may not be optimum wiring, but I've tested them.\\ | These may not be optimum wiring, but I've tested them.\\ | ||
| + | |||
| + | This is the ILI9341 connector pinout:\\ | ||
| + | |||
| + | |||
| + | ^Pin ^ Function ^ | ||
| + | |1 |Vcc | | ||
| + | |2 |Gnd | | ||
| + | |3 |CS | | ||
| + | |4 |Reset | | ||
| + | |5 |Dc | | ||
| + | |6 |MOSI (LCD) | | ||
| + | |7 |SCK (LCD) | | ||
| + | |8 |LED | | ||
| + | |9 |MISO (LCD) | | ||
| + | |10 |T_Clk | | ||
| + | |11 |T_CS | | ||
| + | |12 |T_DIN | | ||
| + | |13 |T_DO | | ||
| + | |14 |T_IRQ | | ||
| LCD to ESP32 (30 pin or d1 mini) wiring:\\ | LCD to ESP32 (30 pin or d1 mini) wiring:\\ | ||
ili9341_to_esp32_wiring.1700749518.txt.gz · Last modified: 2023/11/23 09:25 by 192.168.1.71