User Tools

Site Tools


info:garage_mote_wiring

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
info:garage_mote_wiring [2016/02/07 19:06] 75.177.137.2info:garage_mote_wiring [2016/02/07 19:36] (current) 75.177.137.2
Line 2: Line 2:
 The cabling from the sensors to the PCB is a CAT-5 split open. The cabling from the sensors to the PCB is a CAT-5 split open.
  
-^Signal^Colors^PCB pin^ +^Signal^Colors^PCB pin^function
-|Vdd|Orange with White stripe|?|hall-1+|Data|White with Orange stripe|1|hall-close
-|Gnd| |?|hall-1+|Gnd|Green with White strip |2|hall-close
-|Data|White with Orange stripe|?|hall-1+|Vdd|Orange with White stripe|3|hall-close
-|Vdd| |?|hall-2+|Data|White with Green stripe |4|hall-open
-|Gnd| |?|hall-2+|Gnd|Brown with White stripe |5|hall-open
-|Data| |?|hall-2+|Vdd|White with Brown stripe |6|hall-open
-|Relay| |?|Relay| +|Relay|Blue |7|Relay| 
-|Relay| |?|Relay|+|Relay|Blue |8|Relay|
  
 {{:info:hall_garage.jpg?400|}} {{:info:hall_garage.jpg?400|}}
-{{:info:garage_mote_pcpb.jpg?400|}}+{{:info:garage_mote_pcpb.jpg?500|}}
  
  
-Vdd 
info/garage_mote_wiring.1454890018.txt.gz · Last modified: 2016/02/07 19:06 by 75.177.137.2