Differences

This shows you the differences between two versions of the page.

--- mars2_system_jan_2011 [2011/01/11 19:51] – tomgee
+++ mars2_system_jan_2011 [2011/01/12 09:31] (current) – tomgee
@@ Line 26: / Line 26: @@
 ===== How It Works =====
+==== Remote ====
+The Remote AVR periodically monitors the one wire temperatures and the optical power interfaces. The data is collected in a data structure.  At a periodic rate the structure is added to an APRS packet and sent to the TT4 over the serial lines. The TT4 formats the data and sends it to the microphone input of the 2 meter radio while keying the transmitter.
+==== Base ====
+Phobos is the base station and is based on the Kahlo mechanical hardware. The RJ45 has been rewired to accomodate an RS232 transceiver with the following pin assignment:
+|Tx Out  |8|
+|Ground  |7|
+|Rx In   |6|