Tom's Life Bits

User Tools

Site Tools

Trace: • xbee_wireless_commands • lcd_4_bit_interfacing • davis_rf_to_wifi_gateway • humidity_monitoring • 3_way_switching_with_shelly_1 • fake_wemo_support_files • traviata_dokuwiki_csv_tables • ili9341_to_esp32_wiring • protocol_for_creating_and_maintaining_jalbums • program_avr_remoteley_with_zigbee
tasmota_controller_front_west_and_back_rotary

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tasmota_controller_front_west_and_back_rotary [2024/06/07 09:50] – tomgletasmota_controller_front_west_and_back_rotary [2024/06/07 09:55] (current) – tomgle
Line 1: Line 1:
 ===== Irrigation-X2 controller ===== ===== Irrigation-X2 controller =====
 This is in the ammo case under the TV.\\ This is in the ammo case under the TV.\\
-Tasmota programmed into it plus added Rule 1 using the Tasmota console.//+Tasmota programmed into it plus added Rule 1 using the Tasmota console.\\
 IP= 192.168.1.34\\ IP= 192.168.1.34\\
  
-<code>+----   
 + 
 + 
 + 
      Rule1       Rule1 
      on System#Boot do SerialSend5 0 endon      on System#Boot do SerialSend5 0 endon
Line 11: Line 15:
      on Power2#State=1 do SerialSend5 A00201A3 endon      on Power2#State=1 do SerialSend5 A00201A3 endon
      on Power2#State=0 do SerialSend5 A00200A2 endon      on Power2#State=0 do SerialSend5 A00200A2 endon
-</code>+      
 +Make sure Rule1 is on:\\ 
 +"Rule1 1"\\ 
  
tasmota_controller_front_west_and_back_rotary.1717768249.txt.gz · Last modified: 2024/06/07 09:50 by tomgle