tasmota_controller_front_west_and_back_rotary

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
tasmota_controller_front_west_and_back_rotary [2024/06/07 09:52] tomgletasmota_controller_front_west_and_back_rotary [2024/06/07 09:55] (current) tomgle
Line 1: Line 1:
 ===== Irrigation-X2 controller ===== ===== Irrigation-X2 controller =====
 This is in the ammo case under the TV.\\ This is in the ammo case under the TV.\\
-Tasmota programmed into it plus added Rule 1 using the Tasmota console.//+Tasmota programmed into it plus added Rule 1 using the Tasmota console.\\
 IP= 192.168.1.34\\ IP= 192.168.1.34\\
  
-----\\+----  
  
-----\\ 
  
  
-     Rule1 \\ + 
-     on System#Boot do SerialSend5 0 endon\\ +     Rule1  
-     on Power1#State=1 do SerialSend5 A00101A2 endon\\ +     on System#Boot do SerialSend5 0 endon 
-     on Power1#State=0 do SerialSend5 A00100A1 endon\\ +     on Power1#State=1 do SerialSend5 A00101A2 endon 
-     on Power2#State=1 do SerialSend5 A00201A3 endon\\ +     on Power1#State=0 do SerialSend5 A00100A1 endon 
-     on Power2#State=0 do SerialSend5 A00200A2 endon\\+     on Power2#State=1 do SerialSend5 A00201A3 endon 
 +     on Power2#State=0 do SerialSend5 A00200A2 endon 
 +      
 +Make sure Rule1 is on:\\ 
 +"Rule1 1"\\
  
  
tasmota_controller_front_west_and_back_rotary.1717768339.txt.gz · Last modified: 2024/06/07 09:52 by tomgle