Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 216.73.216.116,10.2.128.158
Lock expires at: 2025/06/26 00:32 (10 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== APRS Telemetry System =====

APRS TELEMETRY FORMAT: The on-air packet telemetry format is as follows:



  T#sss,111,222,333,444,555,xxxxxxxx  where sss is the serial number
                                      followed by the five 3 digit analog
                                      values and the eight binary values.



Each telemetry value is actually a decimal number between 000 and 255. The user can adjust his sensors to meaningful values, or the telemetry equations can be modified on receipt. Usually just a a simple 10k and 2.4k resistor divider is used on channel 1 to give you battery voltage in tenths. So a reading of 138 would mean 13.8 volts. It is easy to make APRS display any other quadratic telemetry equation too.

Some source code fragments to achieve this:



void ax25sendASCIIebyte(unsigned short value)
{
	static char count;

	if (value > 999) value = 999;

	count = 0;
	while (value >= 100)
	{
		value -= 100;
		count++;
	}
	ax25sendByte(count + 48);

	count = 0;
	while (value >= 10)
	{
		value -= 10;
		count++;
	}
	ax25sendByte(count + 48);
	ax25sendByte(value + 48);
	return;

}