Page locked

This page is currently locked for editing by another user. You have to wait until this user finishes editing or the lock expires.

Currently locked by: 216.73.216.114,10.1.100.245
Lock expires at: 2025/06/25 11:49 (14 min)

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Pi Lens Info =====
This is a collection of facts and trivia found on the web with technical details about the Pi camera mounts and fitting an M12 mount to it.\\

The mounting holes on both v1 and v2 RPi cameras are on 21 mm centers:\\
  * {{ ::rpi_camera_module_-_elinux.org_2017-04-10_9-14-57_am_.htm |RPI Camera Module V1 & V2 Specifications}}

You have to manually cut or file down a notch in the M12 mount for the micro-flex cable that comes out of the camera module. That isn't too hard, but there is also a M12 mount specifically designed for the RPi cameras, with a notch already:\\
  * http://www.m12lenses.com/CNC-Machined-Raspberry-Pi-M12-Lens-Holder-Metal-p/pt-lh020rpm.htm

The v1 and v2 sensor sizes are the same, the so-called 1/4-inch format. On V1 the lens focal length is f=3.6mm with Angle of View: 54 x 41 degrees and on V2 it is f=3.0mm with Angle of View: 62.2 x 48.8 degrees. Note the angle of view is quoted at full-frame; remember some video modes use a cropped subset of the full frame. This is a moderately wide angle lens. If you double the focal length, you'll get half the field of view. If you get a 8mm lens that's a moderate telephoto, and a 16mm lens is definitely telephoto. I've tried a number of cheap M12 lenses that work "ok":\\
  * http://www.m12lenses.com/M12-Mount-Mega-Pixel-Lenses-s/21.htm
  * 
 but don't expect perfectly sharp images with the tiny 1.4 or 1.1 micron pixels these camera sensors use. Lower f-number lenses are "faster" (let in more light) but will have more shallow depth of field and more blurry overall. You will see f/1.4 or lower sold for use in low light, but I have not had good images with those; I would recommend f/2.0 or above if you want decent resolution.\\

The longest lens I've tried is a reversed 4x microscope objective, about f=27mm delivering 8 degrees horizontal field of view:\\
  * https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=148328


 I made a 3D printed holder for it:
  * http://www.thingiverse.com/thing:1565909
 That lens is good enough to recognize faces from over 100 feet away. Attached image is a crop from 1640x1232 (full-frame) mp4 video from v2 camera, using that lens.\\
{{::picam-personwalking-4xobj.jpg|person about 140 feet (43 m) away}}\\
person about 140 feet (43 m) away\\

===== 3D V2 M12 lens adapter =====

I have remixed the existing M12 lens adapter to fit the Pi V2 camera.
Apparently the mini connector on the V1 camera is centered whereas the V2 camera connector is offset.\\

I printed this and after cleaning up the supports, fits like a glove.\\
  * {{ ::m12_mount_for_raspberry_pi_v2_camera.zip |M12 mount for V2 Pi Camera}}