===== Hall Effect Sensor Wiring =====
The cabling from the sensors to the PCB is a CAT-5 split open.

^Signal^Colors^PCB pin^function^
|Data|White with Orange stripe|1|hall-close|
|Gnd|Green with White strip |2|hall-close|
|Vdd|Orange with White stripe|3|hall-close|
|Data|White with Green stripe |4|hall-open|
|Gnd|Brown with White stripe |5|hall-open|
|Vdd|White with Brown stripe |6|hall-open|
|Relay|Blue |7|Relay|
|Relay|Blue |8|Relay|

{{:info:hall_garage.jpg?400|}}
{{:info:garage_mote_pcpb.jpg?500|}}