===== MiniWirelessW-433Mhz =====
==== Programming Note: ====

If you are using the Arduino IDE, you would choose Duemilanove with ATmega328P 16Mhz. \\

We have sold thousands of these, and they are all pre-tested prior to shipment. If the above board selection does not work, then we will gladly replace the unit for you. 
The miniWireless are preloaded with a test program. If you connect the FTDI interface at 115K baud, you should see the test program printout on powerup and after reset. \\

===== Photos =====

{{:info:anarduino_miniwireless.jpg|}}

{{:info:anarduino_miniwireless_pcb.jpg|}}

{{:info:anarduino_miniwireless_pins.jpg|}}

{{:info:anarduino_miniwireless_sch.jpg|}}