===== Shelly 1 =====

I'm using this in the switch box for the Family Room lamp in front of the West Window.
I programmed the shelly device using the Tasmotizer software along with a current Tasmota.bin image and the hookup diagram below.  I used a Sparkfun FT232 programmer which has 3.3 volts as an output.\\

{{::2023-09-26_110721.jpg|Programming}}\\
(above) Programming Tasmota using USB\\

----


{{::2023-09-26_110830.jpg|Configuration}}\\
(above) Configuration.  Tasmota has a Shelly dropdown to do this when selected.\\

----

{{::2023-09-26_111053.jpg|Switch wiring}}\\
(above) Typical wiring for a single pole switch.\\

----