Differences

This shows you the differences between two versions of the page.

--- tg_xb_enviro_dec_2011 [2011/12/11 13:21] – tomgee
+++ tg_xb_enviro_dec_2011 [2016/12/01 11:52] (current) – tomgle
@@ Line 2: / Line 2: @@
 This Arduino based computer was designed to monitor porch temperature, porch heater, outdoor temperature, greenhouse temperature and greenhouse heater.  The readings will be sent as a packet via Xbee to Meister 2 for display on a web page. Meister 2 will take care of feeding Pachube as well as the web page serving.
-RJ45 inputs on TB XB Enviro:
+RJ45 inputs on TG XB Enviro:
-  * OW1 4-Greenhouse temp, 6-greenhouse heater. Gnd = 5, 3
-  * OW2 4-Porch temp, 6-porch heater, Gnd = 5, 3
+  * OW1 4-Porch temp, 6-porch heater, Gnd = 5, 3
+  * OW2 4-Greenhouse temp, 6-greenhouse heater. Gnd = 5, 3
   * OW3 4-Outdoor temp & humidity, 6-barometer, Gnd = 5, 3
   * spare RJ45
@@ Line 13: / Line 14: @@
 {{:tgxb_enviro_outline.jpg|}}
+  * Currently OW3 & OW4 notused
 ^Device^Address^data^gnd^OW Jack^Jack Pins^Arduino Bus^
-|Porch Tstat|28A3DB9601000076|blue|blue-wh|OW1|4=D, 5=Gnd|6|
+|Porch Tstat|28A3DB9601000076|blue|blue-wh|OW1|4=D, 5=Gnd|7|
-|Porch Heater|2853C49601000017|blue|blue-wh|OW1|6=D, 3=Gnd|7|
+|Porch Heater|2853C49601000017|blue|blue-wh|OW1|6=D, 3=Gnd|6|
+|GH ambient|28E5A69601000030|blue|blue-wh|OW2|4=D, 5=Gnd|2|
+|GH Heater|28DBB996010000DD|blue|blue-wh|OW2|4=D, 3=Gnd|3|
+|DHT hum & temp|  | | - |OW3|6=D, 3=Gnd|4|
+**Terminal strip 1**
+^Source^ ^ ^ Destination ^
+|Heat Tstat brown|O|O|Furnace brown|
+|Heat Tstat orange|O|O|Furnace orange|
+|Heat Tstat OW Data|O|O|Arduino OW2-4 blue|
+|Heat Tstat OW gnd|O|O|Arduino OW2-5 blue/wh|
+|GH Flue OW Data|O|O|Arduino OW2-6 green|
+|GH Flue OW gnd|O|O|Arduino OW2-3 green/wh|
 ===== Hobby Boards One Wire wiring standard =====