Tom's Life Bits

• Default login is root and password is arduino

In order to use the DD-Wrt side of the YUN with Arduino it is necessary to use the bridge function. This example shows using an MQTT client on the Arduino side hooked to the DD-Wrt side with the bridge.

   #include <pubsubclient.h>
   #include <yunclient.h>
   void callback(char* topic, byte* payload, unsigned int length) {
   // handle message arrived
   }
   YunClient yun;
   PubSubClient client("192.168.2.210", 1883, callback, yun);
   void setup()
   {
   Bridge.begin();
   }