ftdi_cable_pictorial
This is an old revision of the document!
FTDI Pictorial
The following is a reminder note of how to use Arduino IDE to monitor a serial pin.
Hook the Pi Tx pin, pin #08 to the FTDI Txd pin #05 which is really receive as viewed from the FTDI. Pin numbering of the FTDI is as follows:
1. Gnd
2. Gnd
3. Vcc
4. Tx out to Rxd of arduino
5. Rx in from Txd of arduino
6 DTR
ftdi_cable_pictorial.1455899923.txt.gz · Last modified: 2016/02/19 11:38 (external edit)