ili9341_to_esp32_wiring
This is an old revision of the document!
ili9342 LCD to ESP32 wiring
The SPI pins, MOSI, MISO, and SCK, are shared between the display and the touchscreen (and SD card reader). TOUCH_IRQ is optional. If you don't wire it, make sure you comment out touchscreen.interrupt_pin.
The SD card pins are not connected.
These may not be optimum wiring, but I've tested them.
LCD to ESP32 (30 pin or d1 mini) wiring:
| Display | ESP32 |
|---|---|
| SCK/CLK | 18 |
| MISO/DO/SDO | 19 |
| MOSI/DIN/SDI | 23 |
| DISP_CS | 33 |
| DISP_LED | 17 |
| TOUCH_CS | 32 |
| DISP_DC | 5 |
| DISP_RESET | 16 |
| TOUCH_IRQ | 21 |
| VCC | 3V3 |
| GND | GND |
ili9341_to_esp32_wiring.1700748962.txt.gz · Last modified: 2023/11/23 09:16 by 192.168.1.71