info:garage_mote_wiring
This is an old revision of the document!
Hall Effect Sensor Wiring
The cabling from the sensors to the PCB is a CAT-5 split open.
| Signal | Colors | PCB pin | |
|---|---|---|---|
| Vdd | Orange with White stripe | ? | hall-1 |
| Gnd | ? | hall-1 | |
| Data | White with Orange stripe | ? | hall-1 |
| Vdd | ? | hall-2 | |
| Gnd | ? | hall-2 | |
| Data | ? | hall-2 | |
| Relay | ? | Relay | |
| Relay | ? | Relay | |
Vdd
info/garage_mote_wiring.1454889985.txt.gz · Last modified: 2016/02/07 19:06 by 75.177.137.2