info:garage_mote_wiring
This is an old revision of the document!
Hall Effect Sensor Wiring
The cabling from the sensors to the PCB is a CAT-5 split open.
| Signal | Colors | PCB pin | function |
|---|---|---|---|
| Data | White with Orange stripe | 1 | hall-close |
| Gnd | Green with White strip | 2 | hall-close |
| Vdd | Orange with White stripe | 3 | hall-close |
| Data | White with Green stripe | 4 | hall-open |
| Gnd | Brown with White stripe | 5 | hall-open |
| Vdd | White with Brown stripe | 6 | hall-open |
| Relay | Blue | 7 | Relay |
| Relay | Blue | 8 | Relay |
Vdd
info/garage_mote_wiring.1454890412.txt.gz · Last modified: 2016/02/07 19:13 by 75.177.137.2