This is an old revision of the document!
Table of Contents
Generac
fram ph4967, Purolator L14476, AC PF1233
Onan
Fram C3P, Carquest 85010, NAPA 1010
2006 Corolla oil filter: ph4967 Purolator PL14476 or L14476 Air filter purolator A25463 Tires: P195/65R15 89T
Bolens tractor
Briggs & Stratton Air Filter 698083
2010 Prius
Oil cartridge: Toyota #04152-YZZA6 ( 04152-37010). The Prius needs 0W-20 oil
Prius oil drain gasket part number: 90430-12031
Prius interchangeable oil filter part numbers:
FRAM CH-10358
AC PF1768 Pontiac GM 19185485 Scion Toyota 04152-37010 04152-YZZA6 Napa 7064 Wix 57064 Purolator L16311 Champ Luberfiner P980 AC PF1768 Carquest 84064 Security CH-10358
Re: 2010 prius oil change
You need a small flat bladed screw-driver to start the prying of the under cover. In a pinch your fingernails will do (don't ask how I know ). Get a oil filter cap wrench that is 64mm with 14 flats. Don't use a 65mm, the cap is on pretty good from the factory and you don't want to round those edges. Don't remember the oil drain size, fairly standard. 2010 Prius recommended oil is 0W20. TG: The oil pan nut is a 14 mm.
UPC for Mobil-1 0w20 (071924449688)
Prius 2010 reset the oil indicator:
First - you need to hit the trip indicator button until you have “trip A” indicated in the display (I use this at re-fueling times)
Next - you will need to push the park button then the power off button - yes you will need to fully turn off the car.
Next - locate the MPH/Kilometers button on the dashboard. Press and hold down and then restart the car by pushing the power on button (hold both buttons down at the same time - when the scale is re-set, let go of both buttons)
Verify by looking at the scale indicator
2011 Corolla
Oil filters: Toyota 04152-YZZA6, Purolator L16311, Fram CH10358, Wix 57064
14mm oil pan nut, passenger side towards rear of oil pan
64mm wrench with 14 flats
2011 Corolla Reset Maintenance Light
to reset the counter and turn the light off, do the following.
turn key to 'ON' (do not start)
press the odometer button until the odometer is displayed… NOT the trip counters
turn key to 'OFF'
hold down the button and turn the key to ON (do not start)
you will see the odometer flashing '——' and then '000000'
the light is now reset