info:misc:setting_up_tt4
This is an old revision of the document!
Setting Up the TT4
The TT4 at Downing Place was setup by trial and error for the symbol and the location.
TT4 Command Mode
In the terminal program with 19200 baud, open the com port. Cycle the TT4 power to on then when the screen message says to “press Esc 3 times”, press the Esc key 3 times
The individual parms can now be entered.
Parm Setting
The correct location is:
103 Downing = LOCATION 3544.0000N 07849.6500W
To set this on the TT4
LOCATION 3544.0000N 07849.6500W
The house symbol is “-“
To set this on the TT4, TSYMCODE -
info/misc/setting_up_tt4.1266091189.txt.gz · Last modified: 2010/02/13 14:59 by tomgee