info:septic_pump_measurements
This is an old revision of the document!
Septic Tank Measurements
The septic tank is 71 inches from the bottom to the top edge of the lip that is flush with the ground. The outlet of the pump is 4.75 inches from the base of the pump. The following diagram shows the needed stand pipe if the pump was on the floor of the tank.
I bought an irrigation controller housing which is fiberglass for use under the pump to keep it off the ground. The housing is xx inches high and yy inches in diameter.
info/septic_pump_measurements.1235925829.txt.gz · Last modified: 2009/03/01 11:43 by tomgee