It rained overnight. My lens came from Virginia and the 4 Huzzah boards I ordered also came. I got bad news from my NewEgg tracking. The disk drive is going to Sarasota, something I did by mistake. Oh dear. USPS is supposed to forward my mail, I'm wondering if it will be sent to Downing Place. I continued to work on the user database import. i think Android is killing the app when it gets imported because it's a long background task. Libbie walked with Anita this morning after the rain showers died down. We got over an inch of rain and all the Growboxes seemed to have held up OK.
The new used lens arrived along with the 4 Huzzahs I ordered. The lens is great. It's not an L lens but it has a wider angle at the low end and only goes to 55 which is a normal range at the higher end. It will be more than adequate for AVSA photography. The old 24 to 70 lens which is an L will no longer auto focus. It needs to go back to Canon for repair. We practiced the Rumba routine a little in the kitchen and then made the sausage French bread pizza for the Cinco di Mayo party. We picked up a 6 pack of craft beer in Kroger. They allow you to pick your own individual bottles to make up the 6 pack. The party was small and Mitzi's influence was definitely missing but we had a nice time. There were not that many snacks besides our French Bread Pizza. We came back around 10.

I started getting the FC4A app running on my desktop. I had some trouble with the keys and had to upgrade the bridge app on the phone. I ended up deleting the app totally and reinstalling including downloading the 75 megs of photos. Once this was done I'm ready to start importing the user files. I had lots of trouble just uploading the photo zip file. It's only 20 megs but is not a quick upload. For dinner tonight we had the Taco Salad once again. After dinner I stopped work and entertained myself with YouTube videos of some jazz bands in New Orleans specializing in Clarinet.

After practicing my Clarinet I called Arlene for her birthday. She was going to try a hike today in a county park to stress herself walking up hills. She said they were going West in the Fall to visit 4 national parks.
I prepared the grow boxes in the morning and planted all the bedding plants except for the tomatoes. i'll do them tomorrow although I did prepare the beds today. We went to our Dance lesson and concentrated some more on the Tango. hopefully we can practice Friday night on a Tango or two. We had Taco Salad again for dinner. This is a nice Cooking Light recipe. After dinner we went to the group lesson which tonight was a Rumba pattern. Including Robert we were equally split boy-girl with Ken, Robert and I being the guys and jennifer, Laurie and Libbie the girls.

I did an experiment this morning. I had an order of XLT button down shirts, 4 of them, froom King Size Co. but they were too big. I need an LT instead. I took a shirt, ran it on express wash with no soap but very hot water and then dried it. it shrunk to a better size for me. I left at 10:30 this morning for the airport and picked Libbie up. After dropping off her suitcases and stuff we headed out to the Farmers market. I got bedding plants - peppers, cukes, squash and eggplant. We also bought 2 Oleanders, Rosemary, Lavendar, Marigolds and Begonias. Libbie planted the flowers while I tilled the other side of the fence and planted the Oleander as well as 40 Gladiolas bulbs which i have never grown before. In the PM I went to Kroger and got the ingredients for a Taco Salad which we had for lunch along with a bottle of wine. It was a fulfilling and tiring day. I still need to get into the Crawl space and wire up the power to the In-Forcer but i'll postpone that for a few days.

Libbie got a message from Joyce this morning that Kent was in surgery for 4 1/2 hours and she has not heard from the Doctors but she was feeling positive. I read about an hour later on Facebook from Joyce that Kent had died. So sad and he was only 66 turning 67 tomorrow. I found a florist near Joyce and ordered a bouquet to be delivered today. I crawled under the house and moved a cart full of bricks from the crawl space. I had to repair the cart after the load. The handles became loose and one screw fell out. The screw had nothing to do with the load but the handles did. I got the PVC pipe mounted easily. I used the $34 hole saw to make a 3 1/2 inch hole then cut the pipe to fit. The jab went well. I went to Lowes earlier and picked up some screws and perforated hanger which I installed to support the horizontal pipe run. For dinner I was going to make a Cooking Light Taco Salad but decided instead to visit Chipotle where i ordered a Burrito Bowl with Carnitas. I spent the rest of the evening watching YouTube videos of New Orleans Jazz including a nice one from Lincoln Center about how to make connected notes on a Clarinet to get the New Orleans Jazz clarinet sound.

I dragged the In-Forcer under the house this afternoon. This thing is relatively heavy at 20 pounds. I managed to get it mounted on a floor joist and routed the wires towards the furnace. Now I need to install an outlet and wire it into the furnace power and also wire the control leads up to the furnace. This really wore me out. Tomorrow I'll install the PVC pipe. The pipe is heavy so I don't think it will be any easier. I picked up some chopped peppers and chopped onions for my pizza. Dinner tonight was the pizza which was on a store bought crust, spicy marinara, shredded cheese and the chopped onions and peppers. While working on the membership promo back and forth with Joyce she announced this would have ot be postponed because Kent just had a heart attack.

I had a good lesson with Justin at 9 this morning. He explained the various keys and handed me a sheet of paper with the keys and how they are derived. I never knew this stuff. After the lesson I stopped at Brueggers and picked up some Cinnamon Raisin bagels and then Kroger for cream cheese and Marinara sauce plus a pizza crust for tonight. I mowed the front grass by the street for the first time this season. Two Jehovahs stopped to give me pamphlets. Thanks to a low hanging Dogwood branch I got my arm cut up pretty bad but it was only a surface wound.
I came back in and rested while listening to Flying Dutchman live from the Met. When the Opera was over I suited up and went under the house and moved the electrical box, added a cover and moved the associated wiring. This freed up the space between 2 joists where I plan to mount the In-Forcer. Dinner tonight was a pizza with Marinara Sauce and cheese. I need to add onions and peppers next time.

The In-Forcer air injection arrived today via FedEx. This thing is much bigger than I thought it would be. I went out to Home Depot in the evening and picked up a 3 inch elbow and 10 feet of 3 inch pipe as well as a inch duct extension to attach to the unit. I went under the house and evaluated where the unit will go. I had to clear some insulation between two joists. The insulation is all coming down anyway. Dinner was a Bojangles chicken dinner.

Took Libbie to the airport at 6:07 for her 7:45 flight. Returned home at 6:47 am. Worked out in the front today cleaning up the azaleas by the street and picking up various sticks and branches. The 10 power supplies arrived from Merlin Electronics. They are 5 volt wall warts and should help power projects for a while. I started looking at the code for displaying multi pages on the NCID display. This should be good. I did a little Clarinet practice then went to Lowes and picked up a union and pipe thread paint to fix where the threaded connection is leaking going into the filter next to the water heater. I also bought a CPVC Union for $6. It should have one of these in case I ever need to change out the Filter. Dinner was a mish mash of everything. I had some Salsa and chips and then made a can of chicken sausage gumbo which was quite spicy. I liked it. Listened to Rigoletto live later in the evening and also ordered Southwest tickets for George's 100th birthday on August 12. The party will be at Bill's house.

The crawl space contract came today. It will be $9500 plus the amount of the outside air feed for the furnace which is around $300. I called and accepted the contract and told Deborah to put us on the schedule. Libbie pointed out that the Hot Water heater was not working and there was water in the pan. The pilot was out which I relit but I found a pinhole leak spraying water on the unit. We had a Tango and foxtrot lesson with Robert then we went to home Depot after the lesson and picked up some CPVC parts for the heater. I spent about an hour and a half replacing the leaky pipes with CPVC plastic. unfortunately the threaded connection to the filter is now leaking. i'll take it apart and use pipe thread compound to put it all back together tomorrow. We stopped in Kroger on the way back from home Depot and got a rotisserie chicken which Libbie had with mac n cheese and I had with baked beans in Sriracha sauce. The beans were hot but not as good as with Chipotle. Dinner was the chicken and beans then we went back to the Studio where Ken and Laurie and Libbie and I had a group class by Robert. It was a continuation of the Foxtrot from last week and was quite good. I lent Ken my unlocked phone for his Germany trip in June. On the way back from dance Libbie and I picked up a Brusters Ice cream cone. I had the usual, Chocolate Raspberry Truffle which is over the top good. Libbie is scheduled to fly to RI tomorrow morning so this was our last night out together

I completely removed the 2 foundation fans in the grage and then turned the fans on under the house. The water has gone down but the soil is very wet. Jason from Crawl Tech came as expected at 3:30 today. He and his company are very impressive. He looked under the house and also under the greenhouse crawl space. The greenhouse crawl has standing water in it. He also said that he can not encapsulate the crawl space with the current furnace since it gets it's combustion air from the crawl space. We need a furnace that uses outside air or we need to supply make up combustion air. He called the injection of outside air "fan in a can". It looks like it will be $3500 to waterproof the crawlspace and over $7,000 to encapsulate. He is supposed to send a written quote tomorrow and can start at the end of May. In the meantime I found a device called an In-Forcer which is a blower fan and a box that takes in outside air through a PVC Pipe and shoots it out a 6 inch duct into the crawl space. I'm going to use conditioned air as make up air. Today I put together another Huzzah and rewired the crawl space controller to correctly use 5 volts into the regulator instead of the miswire on the one that burned up. Crawl space humidity monitoring is now back in business! Dinner tonight was spaghetti with cheese sprinkled on and fresh tomato mixed with the bottled sauce.

We got 3.41 inches of rain today and it's not done yet! I went down into the crawl space to see how we were doing and there is running water along the front wall. This is a setback to my encapsulation efforts and must be dealt with before any encapsulation. I reversed one of the foundation fans in the garage so that it blows in but after looking at the 16 inch wall fan at 1200 CFM and the little vent fans at 330CFM I probably should just leave the vents open and draw air straight through. I forgot to practice clarinet today. I'll do it twice tomorrow. Late at night I smelt something burning and traced it to the Huzzah chip in the control closet. It was too hot to touch! It looks like I wired the 5 Volts to the output of the 3 volt regulator which is a disaster for the chip. I'll fix it tomorrow.

Dinner tonight was Pita pockets stuffed with egg salad.

It rained all day today. I spent a lot of time with node-red getting the switch widget to work. I wanted the switch to reflect the state of the fan, this if the fan was turned on by the timer i needed the switch to reflect that. My problem was because I was mixing string and number values for the 0 and 1s. I spent most of the day on this. Libbie made her wonderful pizza again, this time from scratch. After dinner I practiced my Clarinet for a while, trying to hold a C for a long time then same thing for the B which is lower on the scale.

First thing this morning I hooked up a bench supply to the gateway i built yesterday and set it up running on the table in my office. I didn't have time to test it since I went to my Clarinet lesson at 9. In the lesson we covered holding a note for a while without wavering and starting the note with a fast attack. He also suggested trying the scales and fingering in the back of the book. He also detected me missing the metronome count when I cross the break when taking a breath. I need to do some breathing exercises to fill my chest with air. Regarding starting a note, he detected me not starting a note abruptly but instead ramped up to full volume or full steady tone.
After an excellent lesson I drove over to Home Depot at Cary Crossroads and found the Honda tiller was not there even though the website said they had 10 in stock. I finally found a helpful employee who told me the tiller was recalled and on a pallet to go back because of the recall. He suggested a Ryobi string trimmer with a tiller attachment. A few interesting things about the Ryobi. It is a 4 cycle engine head but there also is a head available that is battery powered. This gives the best of both worlds.
I went to Northern Tool and found the honda tiller but it took almost an hour to get it because i had to wait for a fork lift operator who also had to move a truck to get to the tiller. I eventually got home at 11 with the new tiller. Fortunately there was no assembly, just fold the handle straight and put oil in the engine. The engine surprisingly holds only 2.7 ounces of oil which Honda supplied in the box. I like the tiller very much. It's easy on my back. I tilled the spot for the zinnias and then tilled in some potting soil across the top few inches which we also sprinkled with fast acting lime.
Libbie then planted the Zinnia seeds. We now need to addd the Marigolds. After lunch we listened to Eugene onegin wich we skipped todayy at the HD performance because we wanted to get stuff done today. I was so tired I fell asleep during part of the opera. It was a good afternoon. We had the other half of the baby backs from our anniversary along with salad, asparagus and Trader Joes Syrah. After we finished our last glass of wine on the back porch we went over to Brusters and had ice cream cones. It's expensive but they have good ice cream, freshly home made on fresh baked waffle cones.

Libbie worked on the garden and said the spot where she wants to put zinnias is like concrete. I decided this was a good time to get one of those small tillers I was thinking of getting last year. I tried to buy a small roto tiller at Home Depot with a 10% off coupon but the Honda they show as being in stock was not there. I picked up a 1x6 board to mount the projector and lens for my telecine machine. I also picked up a 1x3 for the shelf brackets inside the garage closet where I'm adding more shelves. Today I managed to wire up the moteino to the huzzah to grab Davis ISIS packets and put them on WiFi as MQTT packets. i finished the project but did not have any more 5 volt supplies to test the combination. We went to dance at 8 and had a great time. Ken and Anita were even there after a many month absence. Anita had a stroke which kept her away. After the party we all went out to Spirits in cary. Libbie and I shared a plate of loaded Nachos which came with chili, sour cream, guac, tomatoes, cheese and other goodies. We each had a Red Oak Amber to go with the Nachos.

This morning I worked on cleaning up the Davis ISS moteino code, paring it down so that it only sends Temp, humidity and dewpoint out the serial port. This was a success. I also blocked serial port transmissions until good packets were received for bot the temp and humidity. Next step is to build a little perf board with the Huzzah, moteino and power terminals. I'll have to program the Huzzah without the moteino so I don;t blow it up with 5 volts on the Rx/Tx lines. Once the FTDI is disconnected the ESP Huzzah to the Moteino communication will be 3 volt only so there is no danger. I'm going to use the Huzzah onboard regulator to power the moteino which I hope won't be a strain. It should consume less that 100 ma worst case and typically 40 to 50 ma.
After lunch I filled the gas tank at Costco at 2.19 since we didn't have any Kroger points built up to get cheaper gas. You need 100 points for each 10 cents per gallon discount. i went to Walmart and picked up the Progresso soup which was $1 per can cheaper than Kroger although selection was limited. nancy came over this morning. I fooled with her Honda CRV. She said the navigation system was yelling at her. The icon doesn't seem to be there. She said it acted strange since her oil change. We left at 5:50 for Esquires and got caught up in a traffic jam on the beltline starting at crossroads. We decided to get off at Jones Franklin and eek our way along mostly parallel to the beltline, going to Hillsborough and then getting on Blue Ridge eventually getting to the beltline at Lake Boone. I'm not sure if this saved us anything in time but we kept moving. Our normal table at Esquires was full, Bill and joan were at the table so we sat with the 2 pilots , Bob and his wife as well as Jocylyn and Greg. We stayed until after the break, leaving at 9:30. I was really tired and hardly made it around the dance floor for our last dance.

I woke up and looked at the crawl space humidity and was surprised it went up overnight with the fan running all night long. i then found that the outside humidity had gone up to 83% due to patchy showers in the area. I turned the fan off and went under the house to measure the crawl space vents then went to home Depot and bought some foam board. They have some very nice 1 inch sheets measuring 24x24 for $6 each. I bought two for the two foundation vents, cut them up but did not install them. i worked quite a bit on the MQTT Huzzah gateway that will bridge a Davis ISS Moteino to WiFi and transmit the data using MQTT. We had a great Tango lesson with Robert learning some flick and runs. After having a salad with salad shrimp for dinner we went back to the studio and learned a Foxtrot pattern. In attendance where Ken High, Jennifer, Laurie, and Dawn. We were mismatched boys to girls but learned a fancy pattern I think we can use. I called a crawl space encapsulation company. Deborah on the phone said it would be $4400 minimum to encapsulate. Jason will be coming over next Tuesday afternoon to give me a detailed quote.

After the grocery run to pick up our weekly essentials I mounted the Huzzah in a box with power supply and hooked it all up to the probe wires coming from under the house. What a shock, the crawl humidity is over 90%. We need to seriously do something about this. I created some gauges in node-red that i could read easily of the crawl temp, humidity and dewpoint. I used some manual MQTT commands to activate the fan and found i can lower the humidity to about 80. I let it run all night long after we went to bed. Eugene Onegin was live from the Met this evening. We caught it late but still enjoyed the remainder of it. I fell asleep upstairs while it was still going on. Dinner tonight was spaghetti with cheese using fresh basil and leftover grocery store tomatoes. It came out quite good. The 8mm lens came. i screwed it into the M12 mount on the Arducam Pi camera and had success in rendering an image that was only 6 mm wide and spanned the entire horizontal width of the screen. This used the 8mm lens plus the Surplus Shed lens. The issue now is the camera has to be verv close to the film gate and there is no apparent room. Possibly i can remove the old projector lens housing but i need spring pressure against the film guide which uses the housing to support the spring loaded fingers to apply pressure on the gate/guide. Ideal would be a lens that could be located further away. People seem to use old enlarger lenses. I have an M12 to EOS adapter coming so I will be able to see how the 100mm macro works with the bellows if needed as optics for the Pi camera.

I finished the MQTT code for the humidity-temp-dewpoint sensor and mounted it under the house in the crawl space. I didn't hook it up to the Huzzah inside yet. I played a little with the lens on the Pi camera. I certainly need better optics to resolve a little 8mm frame. I spent the rest of the day reading a many many chapter novel on Literotica which I became absorbed by. It's quite good. Dinner tonight was egg salad in Pita pockets which was quite good. Libbie's Irises are coming along quite good. I mowed the backyard around the Irises as well as the rest of the backyard grass today for the first time this season.

Did some AVSA website editing of the events editor now that Jeri is taking it over. To have multiple editors of a node, edit the node and select the tab named "Grant" then search for the additional ID you would like to have as editor then grant edit and view permission when found.
In the afternoon I hooked up a DHT sensor which I had on a length of CAT-5 and verified functionality using the Dewpoint test program labeled DHTtester. It expects a pullup resistor on the DHT data pin. I have data hooked to Huzzah GPIO 13. This probe will be the under the house probe.
I played with the telecine some more. I decided that I needed a better lens so i ordered an 8 mm lens with M12 mount on ebay for under $9. I also ordered an adapter to go from M12 to Canon EOS. This will allow me to attach the Canon 100mm Macro lens i bought on eBay last year. I also have the extender bellows for Canon along with extension tubes that could be interesting.
Libbie made her excellent pizza tonight with fresh tomatoes and fresh basil. She had a problem getting the pizza out or in, the crust folded under and some of the cheese and tomato sauce ran onto the stone making a mess. The pizza still was great. After dinner we watched a BeeGee tribute which was quite good. Various singers and musicians performed BeeGee songs rearranged for their voice. The issue with performing a BeeGee song is the falsetto sound that was unique to them so when others try to perform the music they need a rearrangement of the melody.

The lenses from Surplus Shed arrived today. I got 2 lenses, a 27mm and a 30 mm. I got a Pi running with a new image and hooked up the camera that came yesterday and then played with the lenses. I was not successful in rendering a closeup image. I had to leave for Shriners before I could continue. We left for Shriners around 6 and had no problems with traffic, mainly because it was Saturday. The band was the troubadours, a band that played mostly Swing music which was disappointing. The food was a seafood buffet which was pretty good. I had fried fish, clams, shrimp and shrimp and grits with a hushpuppy. Veggies were red potatoes and corn. We stayed until a few songs after the break. It was a fun night. The only people from our studio were Anne and Paul. Libbie thought the Rumleys and Lana and Ken High were coming but they didn't come. We heard earlier from Nancy Leaver that the band was mostly swing music.

I finished the taxes this morning and wrote a check for the State. The Federal taxes were set up to auto deduct when I eFiled. They wanted $25 to eFile the state but I used a stamp and mailed the state tax returns with the check. We owed $900 to the State and $1500 to the Feds. I sent more time today watching DIY telecine machines. The Pi cameras came today. I accidentally ordered one from Arducam without an M12 mount so I ordered a second with the mount that comes with a 3,7mm lens. Dinner tonight was a salad with eggs. We went to dance tonight which was the first time in a long time. Attendance was light but we had fun. Afterward we went out to Abbey Road grill in Cary. We sat outside and had a beer. Libbie and I split a Quesadilla. The Cains as well as Ken and Lana joined us. We got home around 11:30 PM.

Our garbage can was super heavy today. We filled it with the discarded invoices from Bluebird and pushed it out to the street for pickup tomorrow morning. I installed three more LED landscape lights in the front yard that I picked up in Lowes. Earlier today Libbie and I went to AgriSupply and bought a new fence charger. This one was a 15 mile one that pulses like the one under the dogwood for the azaleas. Dinner tonight was pork chops and sweet potato with some French Bordeaux that we picked up in Trader Joes yesterday after our dance lesson.

I practiced my clarinet today for the first time since we got back from Central America. Finished the K-1 partnerships. Now I only need to edit the stock sales and I can send this stuff in. My goal is Friday. I ordered a lens from Surplus shed today for the telecine although my next project needs to be the crawl space. We went to dance today and did Tango flicks. We didn't do too bad recalling what we learned so far in Tango. Dinner was a pocket pita stuffed with tomato and egg salad. We had gone to Trader Joes and picked up Pita Pockets, wine and almonds. Libbie has been going through invoices from the attic in prep for Apex shred day on April 22. We brought down three huge tubs of invoices. There's still more up there.

I spent almost the entire day researching telecine machines. I ordered a Raspberry Pi camera with an M12 lens mount and read about the optics required.
Did the grocery thing since it was Tuesday. Dinner was a salad with egg and cucumber.